| Category |
ltem |
Technical Parameters |
| AC input |
input voltage range |
The 220V standard is: 186-236V |
| incoming frequency |
220V 50/60HZ |
| work efficiency |
220V input 95% ;110V input 92% |
| Inverse output |
Output voltage range |
The 220V standard is: no load 229V, full load 216V |
| output frequency |
220V/50HZ |
| work efficiency |
220V / a maximum of 92% |
| output power |
Rated 3500W, peak 7000W, over 3700W protection |
| discharge waveform |
Communicate pure sinusoidal waves |
| output ripple |
Less than 200 mV |
| overcurrent protection |
The output current is delayed for 600 ms after the set point |
| short-circuit protection |
After the short circuit, recover automatically |
| overload protection |
After overload, the automatic power reduction is used |
| Overtemperature protection |
Motherboard heatsink temperature over 50 degrees automatically open fan cooling, over 85 degrees automatic protection |
| Solar energy charging input |
input voltage range |
60-120V |
| interiorinput power |
900W When there is solar energy input, the corresponding prompt light is red. |
| operational principle |
PWM lift pressure |
| Output voltage range |
57.6V |
| output |
Maximum 15A constant current charge |
| transfer efficiency |
Average 95% |